Gate motor repair and replacement
What you notice: The gate does not move on the remote, opens very slowly, or the motor runs while the gate stays put.
What we do: We test the motor, the gearbox and the supply, and either repair the unit or replace it with one matched to the gate weight and leaf length.
Sliding gate rack repair and replacement
What you notice: The gate jerks, slips or grinds as it slides. Teeth on the rack are worn flat, or a rack section has come loose from the gate frame.
What we do: We replace the worn rack sections and re-set the mesh against the motor pinion, so the drive engages evenly across the full travel.
Gate photocell repair and alignment
What you notice: The gate reverses on its own, refuses to close, or closes without stopping for an obstruction β which is the dangerous version of the same fault.
What we do: We clean, re-align or replace the photocells either side of the opening and re-test the safety reversing before we leave.
Gate control board repair and replacement
What you notice: Remotes have stopped pairing, the gate behaves unpredictably, or the board shows a fault light.
What we do: We diagnose the control board, replace it where it has failed, and re-program the remotes and any keypad or intercom trigger to the new board.