At Credible Automation, we provide professional rolling shutter maintenance and servicing in Dubai, covering the mechanical, electrical, and operational components of rolling shutter doors.
What Is Included in Rolling Shutter Maintenance?
A professional rolling shutter service should include inspection, adjustment, cleaning, lubrication, and operational testing of the main shutter components.
1. Shutter Curtain / Slats
The shutter curtain is one of the most important components of a rolling shutter door.
During maintenance, we check:
- Alignment and overall condition of the shutter slats
- Damaged, bent, or misaligned slats
- Smooth movement of the shutter curtain during operation
Properly aligned slats help ensure smooth opening and closing and reduce unnecessary stress on other components.
2. Guide Rails / Side Channels
The guide rails keep the rolling shutter curtain properly aligned while opening and closing.
Maintenance includes:
- Checking guide rail alignment
- Cleaning and removing accumulated dirt and debris
- Lubricating where required
- Checking for obstruction or abnormal friction
Clean and properly aligned guide rails help the shutter operate smoothly.
3. Bottom Rail / Bottom Bar
The bottom bar is inspected to ensure that it remains properly aligned and operates correctly.
We check:
- Alignment and physical condition
- Bottom rubber seal or seal strip, where applicable
- Any visible damage or deformation
4. Rolling Shutter Motor & Gearbox
The rolling shutter motor and gearbox are critical for powered shutter operation.
During servicing, we inspect:
- Motor operation
- Gearbox condition
- Unusual noise or vibration
- Lubrication where applicable
Regular inspection can help identify mechanical or motor-related problems before they result in a complete breakdown.
5. Limit Switches
Limit switches control the opening and closing positions of an automatic rolling shutter.
Maintenance includes:
- Checking the open and close limits
- Adjusting limit switches where required
- Ensuring the shutter stops correctly at the designated positions
Correct limit switch adjustment helps prevent over-travel and improper stopping.
6. Control Panel / Controller
For motorized rolling shutters, the control system should also be inspected.
We check:
- Electrical connections
- Push buttons and control switches
- Controller operation
- Safety and control functions, where installed
This helps ensure reliable electrical operation of the automatic rolling shutter system
7. Bearings & Shafts
The bearings and shaft support the rolling mechanism and are important for smooth operation.
Maintenance includes:
- Inspecting bearings
- Checking shaft alignment
- Lubricating where applicable
- Checking for signs of abnormal movement or wear
8. Roller / Barrel Assembly
The roller or barrel assembly is checked to ensure that the shutter curtain rolls and unrolls smoothly.
We inspect:
- Smooth rotation
- Proper alignment
- Mechanical condition
- Any visible mechanical issues
9. Fasteners & Brackets
Loose fixing points can affect the stability and operation of a rolling shutter.
During maintenance, we check and tighten:
- Screws
- Bolts
- Brackets
- Fixing points
10. Safety Devices
Where safety devices are installed, they should be inspected and tested during maintenance.
These may include:
- Safety edge
- Photocells
- Other installed safety devices
Properly functioning safety devices are important for the safe operation of automatic rolling shutters.
11. General Cleaning & Lubrication
Dirt, dust, and debris can affect the performance of moving components.
General servicing includes:
- Cleaning moving components
- Removing dirt and debris where required
- Lubricating necessary moving parts
- Checking components for smooth movement
12. Final Operational Testing
After completing the maintenance work, the rolling shutter should be fully tested.
The final inspection includes:
- Complete opening and closing operation
- Checking smooth movement
- Checking proper stopping positions
- Verifying overall operational performance