A double swing gate typically has two moving leaves that must operate in the correct sequence and timing. If one leaf moves slowly, starts late, stops unexpectedly, or fails to reach its intended position, the cause may be related to the motor, actuator, gate alignment, hinges, or control settings.
1. One Swing Gate Motor Is Weaker Than the Other
Many automatic double swing gates use a separate motor or actuator for each gate leaf. If one motor becomes worn or develops a fault, that side may move more slowly than the other.
You may notice that one leaf struggles to open while the other operates normally.
Solution: Have both motors inspected to compare their operation and identify any mechanical or electrical faults. The affected motor may require adjustment, repair, or replacement, depending on the diagnosis.
2. Incorrect Opening and Closing Timing
Double swing gates often require specific timing and sequencing so that both leaves open and close correctly. If the settings are incorrect, one leaf may start too early, move at the wrong time, or fail to coordinate properly with the other.
This can happen after control-board replacement, programming changes, or adjustments to the automation system.
Solution: A gate automation technician should check the opening sequence, travel limits, and timing settings according to the manufacturer's instructions.
3. One Gate Leaf Has Stiff Hinges
If the hinges on one side are stiff, worn, or damaged, that leaf may encounter greater resistance during movement. The motor may struggle even when the other side operates normally.
Solution: Inspect the affected side for visible hinge damage, dirt, or misalignment. If the gate moves unevenly or appears difficult to move, arrange a professional inspection of the hinges and supporting hardware.
4. One Gate Leaf Is Misaligned
A gate leaf that has shifted, sagged, or started rubbing against the ground or surrounding structure may not move as freely as the other leaf.
This can place additional strain on its actuator and cause uneven opening or closing.
Solution: Have the gate alignment, hinges, mounting points, and actuator connections checked. Correcting the mechanical alignment may restore smoother movement and reduce strain on the motor.
5. One Actuator Is Faulty or Damaged
The actuator transfers the motor's force to the gate leaf. If one actuator is damaged, worn, or incorrectly mounted, that side may move more slowly or stop before reaching its intended position.
Solution: A technician should inspect the actuator, mounting brackets, connections, and movement throughout the operating cycle. Repair or replacement may be necessary if a fault is confirmed.
6. Different Travel Limits or Motor Settings
Each gate leaf may have its own travel limits and operating settings. Incorrect configuration can cause one side to stop earlier or move differently from the other.
The issue may become noticeable after maintenance, control-board changes, or adjustments to the gate system.
Solution: Have the travel limits and motor settings checked and configured correctly for both leaves. Adjustments should follow the manufacturer's specifications and preserve the gate's safety functions.
7. An Electrical or Control Board Fault
A fault in the control board, wiring, or motor connections can affect one side of a double swing gate. The affected leaf may respond intermittently, start late, or stop unexpectedly while the other continues operating.
Solution: Arrange professional testing of the control board, electrical connections, and both motor circuits. Avoid opening electrical enclosures or handling wiring yourself.
Double Swing Gate Repair in Dubai
Uneven movement in a double swing gate should not be ignored. Continuing to operate the system when one leaf is struggling can place additional strain on its motor, actuator, hinges, and supporting structure.
Our team provides double swing gate inspection, motor troubleshooting, repair, installation, and maintenance for residential and commercial properties in Dubai. We assess both gate leaves, their motors and actuators, mechanical alignment, and control settings to identify the cause of uneven movement and recommend the appropriate solution.
Whether one side opens more slowly, both leaves move out of sequence, or one leaf stops before reaching its intended position, professional diagnosis can help restore smooth and coordinated gate operation.
Contact us today to arrange double swing gate inspection and repair in Dubai.